What are the beautiful custom wardrobe maintenance methods?

Add Date: 2019/8/16    Clicks: 33

The custom-made wardrobe at home is so beautiful, but there are many people who don't care. Especially in the summer, it is not rain or high temperature. For the wardrobe, this is a test. If the maintenance is not proper, the service life of the wardrobe will be greatly shortened. So, how can we maintain the beauty of the wardrobe in the hot summer? Below, I will introduce you to the 8 methods of wardrobe maintenance.

Maintenance method 1
The closet should always keep the door clean and keep no traces of debris and dust in the track. When cleaning, use a semi-wet cloth to wipe the cabinet and cabinet door, and avoid using aggressive cleaning agents. The dirt of the track should be cleaned with a vacuum cleaner or a fine brush. Non-metallic parts such as the frame and the tie rod should be wiped with a dry cloth.
Maintenance method 2
Prevent heavy objects and sharp objects from hitting the track, scratching the cabinet and the door panel. The sealing edge of the cabinet should not touch the water and the rest of the solid solvent, so as to avoid the edge of the seal.
Maintenance method 3
More open wardrobe doors are breathable, so as to avoid bacteria in the cabinet. Use less fragrant ingredients containing chemical ingredients to remove the odor in the closet, because they are easy to form a hazard to the cabinet.
Maintenance method 4
Wooden wardrobes can only be wiped with a dipped cloth. If it is dirty, it can be wiped with a neutral detergent and a damp cloth.
Maintenance method 5
Light rail door pulleys have been used for a long time. A lot of noise is a phenomenon of wear. To ensure that the pulleys are fast and smooth, please add smooth oil along the high and low pulleys every 2-3 months.
Maintenance method 6
When the weather is too humid, please open the window door and let the small bag desiccant be placed at the corner of the closet to prevent the cabinet and door panel from decaying and deforming.
Maintenance method 7
Do not leave the closet in the center of the indirect sunlight, so that the wood is not deformed or cracked under the general illumination.
Maintenance method 8
When using the sliding door for a long time, the dust-proof strip will have a fine glue-like scene, which can be glued with double-sided tape; the lower track locator can be used to find the gap, and the one-point screw knife can be used to push the quasi-positioner to the side of the side plate to the edge. The seam can be made; the sliding door is inclined, and the right side is tilted to adjust the "loose" mark of the left bottom wheel or the "tight" mark of the right bottom wheel.